8、國家自然科學基金委員會面上項目、《IFTOMM Journal of Mechanism and Machine Theory》、《ASME Journal of Mechanical Design》、《 Chinese Journal of Mechanical Engineering》、《機械工程學報》等機械學科領域國際、國內權威期刊和國內幾家著名高校學報特邀同行評審專家。
9、ICIE2010 /IWMAT 2010技術委員會委員。
10、Session Chair for Session 24: Gearing & Transmission at 2015 IFTOMM WORLD CONGRESS,分會場主席。
在《IFTOMM Journal of Mechanism and Machine Theory》、《ASME Journal of Mechanical Design》、《Int J Adv Manuf Technol.》、《 Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science》、《Strojniški vestnik - Journal of Mechanical Engineering》、《Transactions of the Canadian Society for Mechanical Engineering》、《Proceedings of IFTOMM World Congress》、《Proceedings of the ASME International Mechanical Engineering Congress & Exposition ，IMECE）》、《Proceedings of the STLE/ASME 2010 International Joint Tribology Conference 》等國內外著名期刊和國際會議發表論文100多篇；出版學術專著1部，參編著作6部；共申請專利和軟件著作版權57項，其中，申請PCT國際專利3件、中國發明專利23件；已經獲得授權美國發明專利1件和中國發明專利16項以及實用新型專利18件，軟件著作版5件。獲得省、部級教學成果獎2項，校級優秀教學成果獎1等獎1次和2等獎6次。
在《IFTOMM Journal of Mechanism and Machine Theory》、《ASME Journal of Mechanical Design》、《Int J Adv Manuf Technol.》、《 Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science》、《Strojniški vestnik - Journal of Mechanical Engineering》、《Transactions of the Canadian Society for Mechanical Engineering》、《Proceedings of IFTOMM World Congress》、《Proceedings of the ASME International Mechanical Engineering Congress & Exposition ，IMECE）》、《Proceedings of the STLE/ASME 2010 International Joint Tribology Conference 》等國內外著名期刊和國際會議發表論文100多篇；出版學術專著1部，參編著作6部。
1、 Yang-zhi Chen*,Huai Huang,Yueling Lv.A Variable-Ratio Line Gear Mechanism.Mechanism and Machine Theory，98 (2016)：151-163.（SCI,EI）
2、Yangzhi Chen*, Jiang Ding, Yueling Lv, Geometric Constraints and Interference-Proof Conditions of Helix-Curve Meshing-Wheel Mechanism. Transactions of the Canadian Society for Mechanical Engineering, 2015, 39(1)：11-26. （SCI，EI）
3、 Yueling Lv, Yangzhi Chen*, Xiuyan Cui. A Contact Ratio and Interference-proof Conditions for a Skew Line Gear Mechanism. Transactions of the Canadian Society for Mechanical Engineering, 2015, Vol. 39（3）：1-10.（SCI，EI）
4、Meng Yuan, Su Fenghua, Chen Yangzhi, Synthesis of Nano-cu/Graphene Oxide Composites by Supercritical Co2-Assisted Deposition as a Novel Material for Reducing Friction and Wear, Chemical Engineering Journal,2015（5）: 11604-11612.（SCI,EI）
5、Meng Yuan, Su Fenghua, Chen Yangzhi, A Novel Nanomaterial of Graphene Oxide Dotted with Ni Nanoparticles Produced by Supercritical Co2-Assisted Deposition for Reducing Friction and Wear, Applied Materials & Interfaces,281(2015):11-19，（SCI,EI）
6、Chen Yangzhi*.Ding Jiang.Lv Yueling, Design of Polyhedral Helix Curve Meshing Reducer, ASME J.Mech.Des., April, 2014,Vol.136:044503-1,4,（SCI,EI）
7、Chen YangZhi*, Liang ShunKe, Ding Jiang, The Equal Bending Strength Design of Space Curve Meshing Wheel.ASME J.Mech.Des.,JUNE 2014,Vol.136:061001-1,10,（SCI,EI）
8、Jiang Ding, Yangzhi Chen*，Yueling Lv.Position-Parameter Selection Criterion for Helix-Curve Meshing-Wheel Mechanism Based on Sliding Rates.Strojniški vestnik - Journal of Mechanical Engineering,60(2014),561-570. （SCI, EI）
9、Yang-zhi Chen*, Xiao-yan Fu, Jiang Ding, Shun-ke Liang.Geometric Design of Micro-Reducer With Multi-Output Shafts Distributed in Regular Polygon Form.ASME J.Mech.Des.,MAY 2013,Vol.135/051004-1-10. (SCI,EI)
10、Yang-zhi Chen*, Yueling Lv, Jiang Ding, Zhen Chen.Fundamental design equations for Space Curve Meshing Skew Gear Mechanism. Mechanism and Machine Theory，70 (2013) 175–188.（SCI,EI）
11、Yang-zhi Chen*, En-yi He, Zhen Chen. Investigations on precision finishing of space curve meshing wheel by electrochemical brushing process. Int J Adv Manuf Technol (2013) 67:2387–2394. （SCI, EI）
12、Jiang Ding, Yangzhi Chen*，Yueling Lv. Design of Space-Curve Meshing-Wheels with Unequal Tine Radii.Strojniški vestnik - Journal of Mechanical Engineering 58(2012)11, 633-641.（SCI, EI）
13、Z Chen, YZ Chen*，and J Ding. A generalized space curve meshing equation for arbitrary intersecting gear. Proc IMechE Part C: J Mechanical Engineering Science (2012)227(7) 1599–1607.（SCI, EI）
14、Yao Hua-ping, Huang-ping, Chen Yang-zhi, and Zhu Lixue. Analysis on Dynamic Characteristics in Time Domain of Slider with Ultra Thin. Chinese Journal of Mechanical Engineering, Vol.2012,No.3, 2012,(SCI, EI)
15、Yang-zhi Chen , Hu Qiang, Lei-hou Sun. The Design Criterion of the Space-Curve Meshing-Wheel Mechanism Based on Elastic Deformation of the Tine. ASME J. Mech. Des. Vol. 132:1-5, June, 2010. （SCI ,EI.）
16、Chen Yang-zhi, Xiang Xiaoyong, LuoLiang. A Corrected Equation of Space Curve Meshing,Mech. Mach. Theory,2009, 44（7）:1448-1459. （SCI,EI.）
17、CHEN Yang-zhi, LUO Liang, HU Qiang. The Contact Ratio of A Space-Curve Meshing-Wheel Transmission Mechanism , ASME J. Mech. Des. Vol. 131（7）:1-5, July, 2009. Top Journal, （SCI ,EI）
18、Yangzhi Chen, X. Liu, D. G. Chetwynd and P. Huang. Investigation of a novel elastic-mechanical wheel transmission under light duty conditions [J]. Mechanism and Machine Theory, 2008,43（11）：1462-1477. (SCI,EI )
19、Huang H.,Chen Y.Z.*, Lv, Yueling , A novel robot leg designed by compliant mechanism, Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics).8917(2014): 204-213. EI(2014EI1326)
20、CHEN Yangzhi, XING Guangquan, LIU Wenguang, YAO Huaping , Novel Drive Mechanism for in-tube Micro-robots. Front. Mech. Eng. China 2007, (1):1-5. SPRINGER, EI
部分國際會議論文：
21、CHEN Yang-zhi, Lv Yue-ling. Sliding Rate and Parameter Selection of the SCMSGM With two Vertical Skewed Axes. 2015 IFTOMM WORLDCONGRESS. TAIPEI， TAIWAN,October, 25-31,2015. EI
22、Chen Y.Z.*, Zhang, Y,He, EY, Investigation into the post-treatment Process for Titanium Alloy|Space-curve Meshing-wheel. MATERIAL SCIENCE AND ADVANCED TECHNOLOGIES IN MANUFACTURING, 2014-01-01, ISTP (2014CPCI-S111)
24、Yue-Ling Lv, Yang-Zhi Chen, You-Ming Dai. Contact Ratio of Space Curve Meshing Skew Gear Mechanism, 2014 International Conference on Engineering and Technology Innovation, Octobor 31~November 04, 2014,Taiwan. （EI）
25、Chen Y Z, Chen Z. Contact Ratio of Spatial Helix Gearing Mechanism [C].Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition (IMECE2012), 2012, November 9-15, Houston, Texas, USA. （EI）
26、Chen Y Z, Ding J, Yao Ch, et al. Polyhedral Space Curve Meshing Reducer with Multiple Output Shafts [C]. Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition （IMECE2012）, 2012, November 9-15, Houston, Texas, USA. （EI）
27、ChenY Z, Liang S K. Research on the Maximum Bending Stress on Driving Tine of SCMW [J]. Applied Mechanics and Materials, 2012, 184-185:445-449. （EI）
28、Chen Yangzhi, He Enyi, Liang Shunke. Transmission error analysis of space-curve meshing-wheel with angular misalignment [J]. Applied Mechanics And Materials. Vols. 184-185，2012，pp 621-626， （EI）
29、Chen YZ, Chen Z, Fu XY. Design Parameters for Spatial Helix Gearing Mechanism [J]. Applied Mechanics and Materials Vols. 2011，121-126. （EI）
30、CHEN Yang-zhi, Zhen Chen. Progress on design of a novel gearing mechanism [C]. Proceedings of International Conference on Gears, October 4th to 6th 2010, 2010:1465-9, Munich, German.
31、Chen Y Z, SunL H, Wang D, et al. Investigation into the Process of Selective Laser Melting Rapid Prototyping Manufacturing for Space-curve-meshing-wheel [J]. Advanced Materials Research, 2010, 135:122-127. （EI）
32、Yao Hua-ping, Chen Yang-zhi，HuangPing. Numerical Analysis on Dynamic Characteristics of Flying Magnetic head with Ultra Thin spacing. 2009 Proceedings of the STLE/ASME International Joint Tribology Conference. October, 19-21,2009 (EI)
33、Hua-ping Yao, Huang Ping, Yang-zhi Chen. Numerical Analysis on Dynamic Characteristics of Flying Magnetic Head under Ultra Thin Spacing. Proceedings of the STLE/ASME 2010 International Joint Tribology Conference IJTC2010, October 17-20, 2010. (EI)
34、Hua-ping Yao,Huang Ping,Yang-zhi Chen. Analysis on Dynamic Lubrication Characteristics of Gas film in hard disk system. FCC-2010, September 29-31, 2010. Shanghai, China. (EI)
35、Chen Yang-zhi, Xiao jian, Wei Jin-song. A Novel Drug Delivery Device based on the principle of ultrasonic cavitation. Proceedings of IEEE 2nd International Conference on Biomedical Engineering and informatics. Press in science, Tianjin, China, October 2009. EI, ISTP.
36、Chen Yang-zhi, Wei Jin-song, Xiao jian, The Model experiments on a Novel Drug Delivery Device. Proceedings of IEEE 2nd International Conference on Biomedical Engineering and informatics. Press in science, Tianjin, China, October 2009. EI, ISTP.
37、Yao Hua-ping, Chen Yang-zhi, Huang Ping. Numerical Analysis on Dynamic Characteristics of Flying Magnetic head with Ultra Thin spacing. Proceedings of the STLE/ASME International Joint Tribology Conference 2009. EI.
38、Chen Yang-zhi. Reviews on the SCMW mechanism.機械設計與研究，Vol.25,2009,8,增刊
39、Y. Z. Chen, G.-Q. Xing, X.-F. Peng. The Space Curve Mesh Equation and its Kinematics Experiment. Proceedings of 12th IFToMMWorld Congress, Besancon , France, June 18-21, 2007.
40、Chen Yangzhi, Peng Xuefei, Xing Guangquan. Dynamics Modeling and Experiment On Micro-Elastic-Meshing-Wheel Mechanism. Proceeding of International technology and innovation conference (ITIC’2006) .6-7 November 2006,Hangzhou China. EI
41、Zhang Jiang-wei, Han Guo-qiang, Chen Yang-zhi. Image registration method based on rigid dynamics. Proceedings of 2006 IEEE International Conference on Machine Learning and Cybernetics, August, 2006. EI
42、Chen Yangzhi, Chen He-en,Wang Peng, Liu Xian-ping,Derek.G.Chetwynd. A Novel In-tube Robot Driveng Device. Proceeding of The 6th International Conference on Frontiers of Design and Manufacturing. Xi’an Chia, June 21－23, 2004:381-382. “BEST PAPER AWARDS”
43、Chen Yangzhi, Chen Heen, Zhu Wenjian and Zhang Jianwei.(2002). Knowledge supply system based on web for machine design. The Proceedings of Mechanical-electronic Engineering and Computer Application, Edited by Wenjian Zhu and Zhong Situ, November 1-7 2002, Zhaoqing and Hong Kong China, Sponsored by Mechanical Design Institution of China Mechanical Engineering Society, Publishing House "STANKIN", ISBN-7028-0105-9, pp. 88-90.
44、Chen Yangzhi, Liang Sizu Huang-ping and chen-dong.(2002). The study of contact fatigue property of 45 steel after cryogenic treatment. The Proceedings of Mechanical-electronic Engineering and Computer Application, Edited by Wenjian Zhu and Zhong Situ, November 1-7 2002, Zhaoqing and Hong Kong China, Sponsored by Mechanical Design Institution of China Mechanical Engineering Society, Publishing House "STANKIN", ISBN-7028-0105-9, pp. 333-335.
45、Huang P,Chen YZ ,Zhu WJ, He J. (2001). Study on the elastic engagement and friction coupled transmission. PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON MECHANICAL TRANSMISSIONS. 283-287,2001. EI, ISTP
46、Chen Yangzhi, Quan Yongxin, Ma ji. The Study of Effect of Water to Wheel-rail Wear –Stress Corrosion Cracking. ITC Yokohama’95, Japan.
47、Chen Yangzhi, Quan Yongxin, Ma ji. The Study of Locomotive Wheel Middle-frequency Heat-treatment to prolong locomotive Wheel life. ITC Yokohama’95,Japan.
1. ChenY Z, Chen Z, Ding J. Space curve mesh transmission pair and polyhedral space curve mesh transmission, PCT/CN2010/078294, US 8，789，438 B2，Jul.29,2014。
2. Chen Y.Z., Huang H, Lv Y.L, A variable-ratio line gear mechanism, PCT/CN2015/100289.5,Juanary, 2016.
3. Chen Y.Z., Yao L., A concave-convex arc line gear mechanism for parallel axes transmissions, PCT/CN2015/100182.
3. 2004, Chen Yangzhi, Chen He-en,Wang Peng, Liu Xian-ping,Derek.G.Chetwynd. A Novel In-tube Robot Driveng Device. Proceeding of The 6th International Conference on Foontiers of Design and Manufacturing. Xi’an Chia, June 21－23, 2004:381-382. “BEST PAPER AWARDS”.
2005年開始，華南理工大學機械與汽車工程學院陳揚枝教授，在前人研究的基礎上發明了空間曲線嚙合輪（Space Curve Meshing Wheel, SCMW）或稱微小彈性嚙合輪（Micro Elastic Meshing Wheel，MEMW）傳動機構。并且，他與合作者研究建立了空間曲線嚙合方程，并以此為基礎建立了SCMW設計的基本的理論柜架和計算公式，包括重合度計算公式、傳動比（包括最大和最小鉤桿數）計算公式、幾何尺寸計算公式等等；初步研究了基于數控加工技術的新型傳動輪鉤桿的靠模法制造方法及工藝。部分研究成果已經發表于《Journal of Mechanism and Machine Theory》、《Journal of Mechanical Design》、《Proceedings of 12th IFTOMM World Congress》等國際著名期刊和國際會議論文集，同時申請了幾項專利。SCMW是基于發明者建立的空間曲線嚙合理論、以空間曲線為接觸齒形的新型齒輪機構，它特別適合于微小空間內交叉軸間的連續傳動的要求，具有傳統齒輪無法比擬的一些特點，例如，它的單級傳動比可以大于12，最少齒數為4，其空間占用率（按體積計算）約為相同傳動比的圓錐齒輪副的1/8，因此，可望廣泛地應用于微小機械或微機械裝置。陳楊枝教授的發明為齒輪嚙合理論的研究開創了一個新的分支，SCMW的工業化應用將為未來齒輪行業的發展增添新的產品系列，帶來無法估量的經濟和社會效益。
共同發明彈性嚙合與摩擦耦合傳動機構
傳統的機械傳動方法有兩種，一種是嚙合傳動，另一種是摩擦傳動。1998年開始，陳揚枝作為第二發明人與黃平等發明并研究了彈性嚙合與摩擦耦合（Elastic Engagement and Friction Coupled, EEFC）傳動機構。陳揚枝教授主要研究了EEFC 帶傳動和小載荷EEFC輪傳動機構，作為第一作者在《Journal of Mechanism and Machine Theory》等國內外期刊上發表了一系列研究論文。
陳揚枝，1965年出生于福建尤溪，1986年6月畢業于天津大學機械制造本科專業；1995年獲工學博士學位于浙江大學機械學專業；2003-2004年間，他由國家公派在英國WARWICK大學納米技術與微工程研究中心（Center for Nanotechnology and Micro Engineering）做訪問學者一年。
陳揚枝，男，1965年8月生于福建尤溪，工學博士，三級教授/博士生導師�，F(xiàn)任華南理工大學機械與汽車工程學院教授、博士生導師，學術委員會委員，機械學系系主任，信息機械學術團隊負責人。
教育與科研經歷：
教學情況：
已發表的科學研究和教學研究論文：
科學研究論文：
公開或授權專利：
